EMT Practice Test

1. Question Content...

---

Question1: What are the two possible methods of disaster recovery for VMware Mirage endpoints? (Choose two.)

Question2: An administrator is performing a silent installation of a security server and needs to ensure that clients can remotely access their desktops using View's default protocol.
Which parameter should the administrator use?

Question3: The VMware Horizon administrator is unable to configure View Storage Accelerator on a vSphere 6 desktop virtual machine. What could be the reason?

Question4: An administrator is granted access to a vCenter Server with a custom Active Directory user account. The user account should have the required permissions for full management of the View environment.
However, when the administrator attempts to enable View Storage Accelerator, permission is denied.
Which View privilege within vCenter Server needs to be configured?

Question5: An administrator is performing a silent installation of a View Connection Server and needs to ensure that the firewall settings are enabled during the install.
Which parameter should the administrator use?

Question6: How many ESXi hosts may receive vSphere Desktop licenses if three 100-seat View Standard bundles are purchased?

Question7: An administrator has installed a View security server and needs to verify that the installation was successful.
In addition to the security server, which three services should be installed? (Choose three.)

Question8: What task is a prerequisite before installing View Composer?

Question9: Refer to the Exhibit. Based on the exhibit, which two paths are used for PCoIP traffic? (Choose two.)

Question10: Which two deployment types are available to the administrator when enabling View Applications in VMware Identity Manager? (Choose two.)

Question11: What is the minimum user accounts privilege requirement when installing App Volumes 2.x?

Question12: What are the two required steps for VMware Identity Manager to centrally distribute and manage ThinApp packages? (Choose two.)

Question13: Users at a branch office are experiencing poor virtual desktop performance. The branch office has ten users and a 2Mbps link to the datacenter.
Some of the users frequently access video content, but the performance issues began occurring after a recent Group Policy Object (GPO) change. The performance issues do not occur when the same users connect from the main office, which has a 10Mbps link to the data center.
Which PCoIP GPO change is most likely the cause of the performance issues?

Question14: In order for an administrator to utilize a Citrix deployment that includes Citrix NetScaler with VMware Identity Manager, what does the administrator need to deploy?

Question15: What are three valid options for writable volumes? (Choose three.)

Question16: One of the datastores containing a manual desktop pool is running out of disk space and an administrator adds a second datastore.
Which operation should the administrator perform to resolve the issue?

Question17: An administrator needs to provide access to a View virtual desktop for users in Domain A and Domain B.
How should the administrator configure the domains and the View implementation?

Question18: What two prerequisites must be met before View Composer can be installed? (Choose two.)

Question19: In VMware Mirage, the Minimal Restore set of files generally includes what three types of files? (Choose three.)

Question20: Where can an administrator verify that the vSphere Infrastructure version will support the latest version of View?

Question21: While deploying a View desktop pool, an administrator determines that the virtual desktops remain at a status of Customizing.
In the debug-timestamp.txt log file of the View Agent, the administrator finds the error message:
Debug -Unable to connect to JMS
Server.com.vmware.vdi.agent.messageserver.Jmsmanager.a(SourceFile:238)
javax.jms.JMSException: Unable to create a connection to:[ServerEntry,
hostname, port=4001]
What should the administrator do to troubleshoot the connection problem?

Question22: Which two operating systems are supported for App Volumes Management Server? (Choose two.)

Question23: An administrator needs to view Windows 7 Virtual Desktops from the vSphere Console while a user has a PCoIP session to the Virtual Desktop. When the administrator opens a vSphere Console to a Virtual Desktop, the Console screen is black.
The administrator enables the Session Variable Enable access to a PCoIP session from a vSphere console. After this change, a black screen still appears when the administrator opens a vSphere Console to the Virtual Desktops.
What is preventing the Virtual Desktop from showing in the vSphere Console?

Question24: What are two View requirements for ThinApp Appliance? (Choose two.)

Question25: Virtual machines are stuck with a status of Customizing on the Virtual Machines tab within View Administrator during the deployment of a pool.
Which two troubleshooting steps would help resolve this issue? (Choose two.)

Question26: During a new pool creation, an administrator notices that the virtual machines are stuck in the Provisioning state during cloning.
What is the most effective way to correct this issue?

Question27: An administrator needs to provide access to applications for users regardless of whether the users have network access.
Which two VMware components should the administrator choose? (Choose two.)

Question28: An administrator has been asked to remove access to the HR user pool and add access to the Legal user pool.
How should the administrator do this?

Question29: When replacing the default self-signed SSL certificate in a newly-installed VMware Mirage Server with a signed certificate, which certificate store should the signed certificate be placed in?

Question30: In order to establish user assignments for manual desktop pools and automated desktop pools of full virtual machines or View Composer linked clones, which user assignment can an administrator choose?

Question31: Before configuring SAML authentication to work with True Single Sign-On, which two prerequisites must be met? (Choose two.)

Question32: An organization has deployed a View environment. Users need to connect USB devices to their View sessions.
- All client endpoints are Windows 7 thin clients.
- A firewall is in place through which all network traffic flows.
- All Windows patches are up to date on guest virtual machines and endpoints.
Users report that USB devices are not connecting to the View sessions when they are plugged in to the thin clients.
What are two reasons that could cause this behavior? (Choose two.)

Question33: After creating a new desktop pool that contains customization specifications, the administrator sees the following message in the VMware Horizon event database:
Provisioning error occurred for Machine Machine_Name: Customization failed for Machine
What are the two most likely causes of this problem? (Choose two.)

Question34: An administrator has set the default display protocol for a desktop to PCoIP to support 1080p quality video on the LAN. Group Policy Object (GPO) settings are applied to the virtual desktops to enforce the following settings:
- PCoIP session bandwidth floor = 0
- Enable Build to Lossless = Enabled
- PCoIP Maximum Frame Rate = 20
- Minimum Initial Image Quality = 90
Which configuration option is responsible for users reporting that video playback is choppy?

Question35: Writable Volumes can be assigned to which three choices? (Choose three.)

Question36: An administrator needs to ensure that the Horizon View environment accounts for single points of failure.
Which type of server should the administrator install in addition to the Horizon View Connection server?

Question37: An administrator is attempting to configure a new linked-clone pool to use software 3D rendering and notices that the 3D Renderer option is unavailable.
The pool settings are as follows:
- Default display protocol is set to PCoIP.
- Allow users to choose protocol is set to Yes.
- Max resolution of any one monitor is set to 1920 x 1200.
- Max number of monitors is set to 2.
Which setting change should the administrator make to allow the 3D Renderer to be enabled?

Question38: What are two valid Directory sync intervals in Identity Manager 2.x? (Choose two.)

Question39: In what two ways is Enforcing Layers useful in VMware Mirage? (Choose two.)

Question40: When configuring a Microsoft Windows 2012 R2 virtual machine as a single-session View desktop, what Microsoft Windows role or feature must be installed to access the desktop using HTML?

Question41: Which two choices are VMware Mirage App Layer Capture Steps? (Choose two.)

Question42: An administrator needs to install a legacy application to a Dedicated Full Clone Pool inside of View. A ThinApp package is successfully created and assigned to the pool. The Thin App application status on the virtual desktops remains at Pending. Rebooting a desktop fails to resolve the issue.
Which two steps should the administrator take to determine the cause of the problem? (Choose two.)

Question43: An administrator is creating an instant clone pool. During the Add pool wizard process, the Administrator gets to the vCenter Server page, selects "Instant Clones" and notices that the "Next" button is grayed out.
What is the cause?

Question44: When troubleshooting issues with the View Agent, which tool can be used to generate a Data Collection Tool (DCT) bundle?

Question45: An Access Policy is configured to do what activity in VMware Identity Manager?

Question46: Which type of virtual machines can an existing pool contain when cloning an Automated Desktop Pool from an existing pool?

Question47: Which two operating systems are supported when creating a master image for instant clones? (Choose two.)

Question48: Refer to the Exhibit. Based on the exhibit, which pathway is used for RDP traffic?

Question49: Which two capabilities are true for Writable Volumes? (Choose two.)

Question50: An administrator receives reports from users connected to View PCoIP sessions of slow desktop responsiveness and blurry images. Additionally, some users report being randomly disconnected from their sessions.
The administrator determines the following:
- Network Latency is 100ms.
- PCoIP Packet Loss is more than 5%.
Which two solutions should the administrator implement to resolve the issues? (Choose two.)

Question51: An administrator has installed View and needs to configure the PCoIP settings via a Group Policy Object (GPO).
What should the administrator do first?

Question52: In order to expand a Mirage installation from the current 4,000 endpoints to at least 6,000 endpoints, which component must be upgraded?

Question53: A second Identity Manager 2.x server must be added to distribute traffic and eliminate downtime. All of the prerequisites have been met.
What is the most effective method to accomplish this?

Question54: Which device section contains a VMware Mirage endpoint that could be centralized utilizing Wake-on- LAN?

Question55: How can an administrator lock down access to the User Environment Manager management console?

Question56: When installing and configuring User Environment Manager, which features are the components of the installer?

Question57: An administrator needs to create 1000 virtual machines with minimal shared disk space. Additionally, the administrator needs to be able to update the images while ensuring that the users' information is managed in a central location.
Which VMware components should be used to meet the requirements?

Question58: How can an administrator access the User Environment Manager console?

Question59: Which Database Server is supported for View Composer and for the Events Databases?

Question60: Users report poor performance over a wide area network. Ten users share a 5Mbps link for this site. The administrator suspects a PCoIP configuration issue and locates the following PCoIP configuration settings:
- Turn off Build-to-Lossless feature = Enabled
- PCoIP Session Bandwidth Floor = 1000
- Maximum Frame Rate = 24
- PCoIP Client Image Cache Size Policy = 250
Which setting is likely causing the performance issue?

Question61: Support for AppStacks with physical endpoints is available with which three constraints? (Choose three.)

Question62: What is the minimum virtual machine hardware version required to use VGPU?

Question63: An administrator needs to install View Composer. The current environment uses a vCenter Server appliance and four ESXi hosts.
Which two steps should the administrator take to complete the installation? (Choose two.)

Question64: What is the main consideration when planning storage for a virtual desktop infrastructure solution?

Question65: An ESXi host has instant clone virtual machines running on it. What tool should be used to place it into maintenance mode?

Question66: While a View administrator is configuring the vRealize for Horizon Broker Agent, this error message is displayed:

What two actions should the administrator take to resolve the issue? (Choose two.)

Question67: Where does User Environment Manager store the Flex Configuration files?

Question68: Which are two custom setup options when installing VMware Horizon Agent on a master image? (Choose two.)

Question69: To use PCoIP with a physical machine, what must be installed on the machine?

Question70: A company is planning to use the Horizon 6 product suite to transform the end user computing environment in the organization.
Which two statements represent capabilities of the Horizon 6 family of products can help the company fully transform their environment? (Choose two.)

Question71: Which three configuration consoles are available in the VMware Identity Manager administrator? (Choose three.)

Question72: Which three tools are recommended to analyze End User Requirements for performance before implementing View? (Choose three.)

Question73: An administrator is installing View Connection server and stops at the Authorize a View Administrators account step.
Which user or group is the default suggestion at this stage?

Question74: An administrator identifies PCoIP packet fragmentation on the network. The following items have been discovered:
- Network Path Maximum Transmission Unit (MTU) is 1200
- PCoIP Traffic has Quality of Service (QoS)
What should the administrator do?

Question75: An administrator deployed a linked-clone pool with virtual desktops running Windows XP for a branch office. The Active Directory server supporting the office is a Windows Server 2008 Read Only Domain Controller (RODC). The administrator makes the following changes to Sysprep:
- Join the Domain
- Use the Virtual Machine name for the NetBIOS name
When the administrator attempts to provision the desktops using View Composer, the following error message is displayed: View Composer agent initialization state error (18): Failed to join the domain (waited
565 seconds)
What should the administrator do to provision the virtual desktops?